Type-c waterproof

With the continuous development of electronic products, there are more and more products with USB interface, occupying a large market share. USB transmission\/VGA or HDMI 3 interfaces, which have good practicability, and can also be compatible with previous generation interfaces such as USB3.0 and USB2.0 through adapters, which can better meet people's daily use needs. However, when the product is in use , The interface rubber core is often worn, the product is deformed under the condition of external force extrusion, the product is easily deformed and causes short circuit when it is pulled by external force during the work, and a series of problems such as gaps between the sleeve and the insulating core of the product are prone to occur. At present, the length of commonly used USB interface products is too long, and the production and assembly process is relatively complicated.

During the operation of the waterproof TYPE-C socket, do not touch the interface with your hands, so as not to be scratched by the pin chip. And after the headphone socket is powered on, do not touch the interface of the headphone socket with your hands, so as to avoid scratches. It is also very easy to cause some safety accidents of electric shock.

Do not exceed the specified rated current when the waterproof TYPE-C socket is working. If the rated current is generally exceeded, it will cause some components inside the usb socket to speed up aging, etc., or it may cause problems when the usb socket is used. Data transmission interruption or abnormality and other faults will directly cause damage to the TYPEC socket and make it unusable.

The second is that TYPE-C waterproof sockets of different specifications cannot be used casually, because after all, not all equipment can be compatible with certain specifications. Otherwise, once the applied TYPEC socket is not applicable, it will lead to the use of TYPEC socket. It will be damaged soon.

After each use of the TYPE-C waterproof socket, be careful to unplug the usb plug, otherwise there will still be a certain current at the headphone plug, which will easily cause the transmission chip of the TYPEC socket to age faster over time. It will affect the performance of the usb socket. And when the TYPEC socket is not in use, remember to cover the dust cover to avoid excessive dust accumulation, which will also cause noise to the performance of the TYPEC socket.

TYPE-C waterproof connector parameters and characteristics:

Features: With fast transmission speed, power up to 100W, support forward and reverse insertion, bidirectional transmission, slim size.

Shell: aluminum alloy shell

Waterproof grade: IPX7

Plastic: temperature resistant PA9T material

Terminal: high-conductivity copper, gold-plated 3u (current can exceed 5A) non-high-conductivity copper material current 3A

Production process characteristics: 3 times of vertical injection molding (Molding), the service life can reach 10,000 times, and the service life of the assembled production process is less than 5,000 times

Product Features: Lifespan is more than 10,000 times, and the current supports up to 5A

The waterproof level of TYPE-C waterproof connector is as follows:

IPX1: Anti-vertical dripping, vertical dripping will not affect the device

IPX2: Anti-slant dripping water, 2 sides tilted at 15 degrees will not affect the equipment

IPX3: Waterproof, splashing water within 60 degrees of tilt will not affect the device

IPX4: Waterproof, splashing water at any angle will not affect the device

IPX5: Waterproof spray, spray from any direction, will not affect the equipment

IPX6: Anti-strong spray, use strong water pipe to spray arbitrarily, it will not affect the equipment

IPX7: Waterproof, immersion in 1 meter deep water for 30 minutes has no effect on the device

IPX8: Anti-dive, fully submerged in 1.5 meters deep water for half an hour without affecting the equipment

IPX9: Anti-high temperature and high pressure spraying, high temperature 10KPA below 80 degrees high pressure spraying water from 4 directions has no effect on the equipment