The waterproof TYPE-C interface product is small in size, and it is best to perform the waterproof test of the Type-c interface mainly used for data cables or charging cables. Usually, make a USB interface waterproof test fixture with the same shape as the interface. Insert The type-c interface can directly start the waterproof test of the USB interface. For the Type-c interface on the flexible board, it is difficult to perform the waterproof test. The key point is the Type-c interface waterproof test fixture. This time, we need to use the C type interface USB interface waterproof Test fixture, it has auxiliary fixing function, and the waterproof detection method of USB interface is the same.

Waterproof TYPE-C interface or USB connector with IP67 waterproof performance has become a new standard for various products, because they can provide ubiquitous reliability, faster charging speed and faster data transfer, so waterproofing is necessary Test the waterproof TYPE-C interface, so the product can be used very reliably.

Because the IP67 standard stipulates that the water depth is 1 meter (about 10kPa). In the general test, the pressure will increase, and the waterproof performance test will be carried out under the pressure of 15-20kPa.

The detection parameter settings and test control of waterproof TYPE-C are as follows:

1. Test pressure: 10.5~15KPa (simulate the test pressure of the product when the water depth is 1 meter)

2. The upper limit of allowable leakage: 0.05KPa (equivalent to 50Pa)

3. Test data: the intake time is 2S, the voltage stabilization time is 2S, the test time is 5S, and the exhaust time is 1s. The whole test process can be completed within 10 seconds.

4. After setting the test parameters, you can put the C-type product to be tested into the test mold for testing.