For most current smartphone electronics, TYPE-C connectors are basically a must. However, it is often difficult to solder the phone's TYPE-C connectors because the keys are the pins between the TYPE-C connectors. The distance is too close , I accidentally soldered 2 pins together. Moreover, there are many details that need to be paid attention to during the soldering process. If it is not handled properly, it is easy to damage the ubs socket. So today, I will introduce you in detail how to solder the mobile phone TYPE- C connector, and pay attention to details.

First of all, pay attention to cleaning the interface and each solder joint before welding the TYPE-C connector, because it is forbidden to leave moisture and debris on the welding seam, otherwise it will affect and cause the welding to be unstable. The next operation is Use flux to wipe the solder joints of the pins of the TYPE-C connector. Be careful not to add too much flux, otherwise it will cause some wrong soldering or unstable soldering situations. Due to the function of the flux, it It can be used to fix the TYPE-C connector interface and facilitate soldering. After applying the flux, clean the excess tin on each solder joint with a soldering iron.

Then align the pins of the TYPE-C connector with the connection points on the phone pad, lightly press the pins with a soldering iron, wait for a few seconds to cool, and then you can solder them. Instructions: When Luotie presses the pins of the TYPE-C connector When connecting the pins, do not use too much force, otherwise the pins of the TYPE-C connector interface will be soldered.

When you do not need to use the TYPE-C connector, please remember to cover the dust cover. The main function is to prevent the intrusion of dust and impurities. Otherwise, excessive dust accumulation on the TYPE-C connector interface will directly affect its performance.

When using a TYPE-C connector, you must align the TYPE-C connector with the pin of the TYPE-C connector before you can insert it. Otherwise, if the TYPE-C connector is misaligned, it is easy to force Insert. It will cause the pins of the TYPE-C connector to break or bend, so it will affect the use of the TYPE-C connector, so usually pay attention to this before connecting the TYPE-C connector and the TYPE-C connector.

The connection between the TYPE-C connectors should not be inserted frequently, otherwise the interface pins of the TYPE-C connector will lose elasticity, and the TYPE-C connector will be loose. Insert the TYPE-C connector. The connection is unstable. Once done, the next step at this point is to not ignore the inspection work. It should be possible to measure by a multimeter whether the pins of the TYPE-C connector are soldered well. If they are not soldered correctly, they must be soldered again.